The RTL1090 Yahoo Group mailing list has had quite a few posts recently from folks having trouble getting RTL1090 and Globe-S RTL Edition working together. The funny thing is, the two programs are designed to work together! Regardless, people hit snags. In an effort to help out, I’ve put together this tutorial. Connect your dongle and …
Author Archives: Rob
Superimpose Your Polar Plot in Google Earth
The polar plot above was made using the SBS Plotter software (top-left inset). The data was then massaged into a format that could be imported into Google Earth. The rest is some Photoshop magic. Here’s how I made the image above… Gather Data I use the SBS Plotter software to create the polar plot. This …
Continue reading “Superimpose Your Polar Plot in Google Earth”
Mode-S and ADS-B on a Raspberry Pi
Caveat What follows is what I wrote the day after setting up my Raspberry Pi to receive and decode Mode-S and ADS-B messages from commercial aircraft. Before publishing this post, I followed my own instructions to get it working a second time. I failed. I failed not because my steps are wrong; I failed not …
How to Setup ADSBScope
There has been quite a bit of back and forth on the RTL1090 Yahoo Group lately about setting up ADSBScope to monitor aircraft using an RTLSDR dongle. It isn’t difficult, but ADSBScope isn’t very intuitive and the German spellings in some of the menu items could lead to some confusion. However, since it’s free, you …
Today’s Flights — How To Extract Data from BaseStation.sqb
I recently added a page to this website, Today’s Flights, that shows all of the aircraft recorded by my virtual radar setup during the calendar day. If you’re interested in doing the same on your website, here’s a tutorial that explains how I did it with my WordPress-based blog. What You Will Need sqlite3.exe — …
Continue reading “Today’s Flights — How To Extract Data from BaseStation.sqb”